Disposable Respirators

Respiratory Protection » Disposable Respirators 
Viewing Page 7 of 11 (131 results)
MOL%204201

AirWave N95 Particulate Respirato, Small

Items #: MOL 4201
Brand: Moldex

AirWave N95 Particulate Respirato, Small
Usually Ships 2-5 Days
UOM : BX (10 EA)
$19.70
MOL%204600

Airwave N95 Particulate Respirator

Items #: MOL 4600

Airwave N95 Particulate Respirator size Medium/Large with adjustable smart strap, 10/bx
Usually Ships 2-5 Days
UOM : BX (10 EA)
$33.30

Ultra-Soft Fog-Free Surg Mask

Items #: MMM 1833

White mask with no color dyes intended for healthcare providers with sensitive skin. Helps protect both patients and healthcare workers against the transfer of microorganisms Benefits Ultra-soft fog free surgical mask, with medical grade, non-woven foam fog free strip, to reduce eyewear fogging. Easy breathability. Anti-fog, medical-grade, non-woven strip over nose to reduce fogging of eyewear Highly breathable tie-on surgical mask Flat with bi-directional pleats for increased wearer comfort, and vertical ties Filtration efficiency: BFE{1} = >99%, PFE{2} = >99%. {1} - Bacterial Filtration Efficiency (BFE) determined by the modified Greene and Vesley and in vitro test method. {2} - Particle Challenge Study - measures filter efficiency only against mass median aerodynamic diameter particle. Surgical mask tests were conducted by an independent laboratory following a 3M internal protocol and using a 0.1 micron latex sphere at a flow rate of 28.3 liters per minute. PFE test results are provided for comparing performance of surgical masks under similar laboratory conditions. This does not reflect expected levels of filtration efficiency in actual use conditions nor replace the need to use NIOSH certified respirators if exposed to hazardous airborne contaminants.
Usually Ships 2-5 Days
UOM : CS (300 EA)
$99.00
MMM%201840FS

High Fluid Res Proc Mask W/Face Shield

Items #: MMM 1840FS

Comfortable earloop procedure mask with face shield - easy to put on and remove Intended to help reduce exposure to blood and body fluids and help reduce patient exposure to contamination caused by exhaled organisms High fluid level resistance helps reduce the potential of wearers exposure to blood and body fluids. Benefits Lightweight, earloop mask is easy to put on and remove. It is comfortable and fits a wide range of wearers. The anti-fog face shield provides an additional barrier against fluid splash.
Usually Ships 2-5 Days
UOM : CS (300 EA)
$480.00
MMM%201900

1900, Filtron Duckbill Tie-On Surg Mask

Items #: MMM 1900

Comfortable duckbill off- the- face construction with vertical ties. Low to moderate fluid-splash resistance intended to help protect the patient and the health care personnel from transfer of microorganisims and helps reduce exposure to blood and body fluids. Anti-fog, off-the-face design, vertical tie mask. Manufactured with 3M Filtration Technology and soft comfortable non-irritating inner lining. Has a lower delta P, a measurement sought by clinicians performing longer surgical procedures. Designed to fit a variety of facial shapes and sizes. Off-the-face (duckbill) design helps keep the mask away from nose and mouth for greater comfort and breathability. Lightweight, three-layer construction is comfortable to wear. Filtration efficiency: BFE1 =99%[1], PFE2 =99%[2] [1] BFE = Bacterial Filtration Efficiency [2] PFE = Particulate Filtration Efficiency meets the new classification system for mask standards STM F2100-04. PFE test results are provided for comparing performance of surgical masks under similar laboratory conditions. This does not reflect expected levels of filtration in actual use conditions nor replace the need to use NIOSH certified respirators if exposed to hazardous airborne contaminants.
Usually Ships 2-5 Days
UOM : CS (600 EA)
$12.00
MMM%2052P71

Half Facepiece Disp Resp OV/P95, MD

Items #: MMM 52P71

Half Facepiece Disp Resp OV/P95, MD Approved against certain organic vapors and particulates. 12 per case.
Usually Ships 2-5 Days
UOM : EA
$26.16
MMM%2053P71

RESP LG W/OV/P95

Items #: MMM 53P71

Half-Mask Respirator w/ OV/P95 Filter, L Non-allergenic Signature One-Step Maintenance-Free Half Mask Respirators are ready to use with no spare parts to stock or cartridges to replace. They’re completely assembled with Organic Vapor/P95 cartridges and filters in a re-sealable bag. The soft, lightweight elastomeric facepiece, cradle suspension, and easy-adjust head straps facilitate proper and comfortable fit, and the low profile swept back cartridge gives better visibility. Inventory requirements simplify and reduce record keeping necessary for OSHA compliance. NIOSH approved. Identifiers Model Number: 8211, 8311 UOM: EA Categories: Personal Protection Equipment Louis Gerson Respirators RESP W/ OV/P95 FILTER LG MAINT FREE Maintenance Free
Usually Ships 2-5 Days
UOM : EA
$26.16

Tekk Paint Project Resp, Lg

Items #: MMM 6311PA1-A

Low maintenance Bayonet style cartridges for comfort Adjustable straps Cartridges and pre-filters can be replaced Assembly consists of 1 each 3M half facepiece, 1 pair of 3M organic vapor cartridge, 2 pairs of 3M particulate filter, and 1 pair of 3M filter retainer
Usually Ships 2-5 Days
UOM : CS (4 EA)
$161.28

Tekk Prot, Sanding,Fiberglass Respirator

Items #: MMM 8200HA1-A

Recommended for particulates from sanding, grinding, sawing and insulating projects. Patented filter technology for easier breathing. NIOSH approved: N95. Provides at least 95% filtration efficiency against solid and liquid aerosols that do not contain oil Adjustable nose clip that reduces potential for eyewear fogging and helps ensure a custom and secure seal Non-valved, disposable respirator NIOSH approved: N95
Usually Ships 2-5 Days
UOM : CS (12 PK)
$74.04

Tekk Prot, Sanding,Fiberglass Respirator

Items #: MMM 8200HB5-A

3M™ Sanding and Fiberglass Respirator, used for non-harmful dusts from sanding, grinding, sawing and insulating particles, is designed to be comfortable and easy to use. 3M™ Sanding and Fiberglass Respirator features proprietary filter technology for easier breathing and an adjustable nose clip that helps reduce eye protection fogging, helps ensure a better seal around the face area and gives the user a snug fit. With a 95% filter efficiency against solid and liquid particles that do not contain oil, the 3M™ Sanding and Fiberglass Respirator is a great choice in respiratory protection for both the pro and the DIYer when working on projects that include sanding, grinding, sawing and insulation. Use for non-harmful dusts from sanding, grinding, sawing and insulating particles Proprietary filter technology for easier breathing Adjustable nose clip reduces fogging, helps ensure a better seal and snug fit NIOSH approved: N95
Usually Ships 2-5 Days
UOM : CS (4 PK)
$50.16
MMM%208210DA1-A

Tekk Prot, Drywall Sanding Respiratr

Items #: MMM 8210DA1-A

Recommended for drywall sanding. Advanced filter media allows easier breathing. NIOSH approved: N95. Provides at least 95% filtration efficiency against solid and liquid aerosols that do not contain oil Adjustable nose clip that reduces potential for eyewear fogging and helps ensure a custom and secure seal Non-valved, disposable respirator NIOSH approved: N95
Usually Ships 2-5 Days
UOM : CS (12 EA)
$68.04
MMM%208211

Particulate Resp Cool Flow Exh Valve N95

Items #: MMM 8211
Brand: 3M

Particulate Resp Cool Flow Exh Valve N95 10 per box, 8 boxes per case
Usually Ships 2-5 Days
UOM : BX
$33.18
View Page:   « PREV 1 2 3 4 5 6 7 8 9 10 11 NEXT »