Respirator/Air Filtration Parts and Accessories

Respiratory Protection » Respirator/Air Filtration Parts and Accessories 
Viewing Page 3 of 106 (1,266 results)
Galvanized Cross

Galvanized Cross

Items #: ALE 9000-13

Allegro 9000-13 Galvanized Cross
Call For Availability
UOM : EA
$9.11

Galvanized Tee

Items #: ALE 9000-14

Allegro 9000-14 Galvanized Tee
Call For Availability
UOM : EA
$4.40

Elbow

Items #: ALE 9000-16

Allegro 9000-16 Elbow
Call For Availability
UOM : EA
$4.40

Street Elbow

Items #: ALE 9000-17

Allegro 9000-17 Street Elbow
Call For Availability
UOM : EA
$5.72

Pipe Nipple

Items #: ALE 9000-21

Allegro 9000-21 Pipe Nipple
Call For Availability
UOM : EA
$4.40

Elbow

Items #: ALE 9000-22

Allegro 9000-22 Elbow
Call For Availability
UOM : EA
$4.40

Chrome Hex Bushing

Items #: ALE 9000-28

Allegro 9000-28 Chrome Hex Bushing
Call For Availability
UOM : EA
$1.85
100ft Breathing Air Hose, 3/8in dia,

100ft Breathing Air Hose, 3/8in dia,

Items #: ALE 9100-100

Allegro's Low Pressure Airline Hoses are NIOSH approved when used with Allegro's Supplied Air Respirators. Constructed from rugged polyvinyl chloride and reinforced with braided polyester yarn. These hoses provide a temperature range from -20°F to 150° F (-28.8°C to 65.5°C). Manufactured with OBAC quick-connect couplers. Maximum Pressure is 185 psi @ 70°F (12.76 bar@ 21.1°C)
Call For Availability
UOM : EA
$271.00
Pre-Filter Stand Assembly

Pre-Filter Stand Assembly

Items #: ALE 9350-03B

Pre-Filter Stand Assembly
Call For Availability
UOM : EA
$53.05
Pre-Source Filter, Reg/Filter Manifold

Pre-Source Filter, Reg/Filter Manifold

Items #: ALE 9350-03C

Where air quality is especially low, this free-standing or wall-mounted particulate assembly helps extend the life of the filter panel’s disposable filters by removing liquids and contaminates down to 5 microns. It is equipped with an adjustable high pressure regulator and gauge to meet the NIOSH requirement for point-of-attachment. CONSTRUCTION: Stand: Powder coated steel Relief valve: Brass, spring loaded (External) Max Temperature: 150°F (65.5°C) Maximum pressure: 250 psi (17,2 bar) Flow Capacity: 165 CFM Fittings: ½” Quick-Connect Hansen REGULATOR & MANIFOLD: Manifold: Zinc Adjusting knob: Acetal Body Cap: ABS Valve: Balanced Valve Design, Brass/Nitrile Diaphragm: Spring loaded, Nitrile/Zinc Pressure gauge: Analog, 0-300 psi, 1½” diameter FILTRATION BOWL: Bowl: Zinc, with a Polycarbonate sight gauge Element retainer: Acetal Useful Retention: 2.87 oz (84.9cm2) Seal: Nitrile FILTER ELEMENT: Standard Filtration: 5 Micron Element Type: Coalescing Material: Sintered Polyethylene Drain: Automatic mechanical with float - See more at: http://www.safetycompany.com/products/allegro-9350-03-air-source-pre-filter.html#sthash.Mq6jhnco.dpuf
Call For Availability
UOM : EA
$285.00
Gauge 0-300 PSI

Gauge 0-300 PSI

Items #: ALE 9350-16

Allegro 9350-16 Gauge 0-300 PSI
Call For Availability
UOM : EA
$23.10
Automatic Drain Float Assembly

Automatic Drain Float Assembly

Items #: ALE 9350-23

Allegro 9350-23 Automatic Drain Float Assembly
Call For Availability
UOM : EA
$94.04
View Page:   « PREV 1 2 3 4 5 6 7 8 9 10 11 NEXT »