Confined Space Equipment

Confined Space Equipment 
Viewing Page 11 of 38 (451 results)
SINGLE SPEED ELECTRC BLOWER

SINGLE SPEED ELECTRC BLOWER

Items #: AIR SVB-E8

The industrial grade Air Systems SVB-E8 Single Speed Electric Blower is engineered to use for non-hazardous, confined space locations. It is constructed with a durable steel frame featuring dual handles. This CCE registered and CSA approved Air systems blower also features molded safety guards and an 8 inch flange for intake and exhaust.
Call For Availability
UOM : EA
$995.00
BLOWER ELECTRIC 2 SPEED

BLOWER ELECTRIC 2 SPEED

Items #: AIR SVB-E8-2

The Air System’s SVB-E8-2 Dual Speed Electric Blower is specifically designed to use in confined spaces. It features a high speed electric motor with polyethylene fan housing for better ventilation. It is designed with rubber isolation mounts, non-sparking blower wheels and dual handles fixed onto a powder-coated steel frame.
Call For Availability
UOM : EA
$1,450.00
2-Speed Electric Blower Kit

2-Speed Electric Blower Kit

Items #: AIR SVB-E82CUP
Brand: Air Systems International

The saddle vent ventilator provides continuous access to the manhole for either entry or egress. Traveling in and out of the confined space can now be done quickly and safely. The Saddle Vent increases worker productivity as well as the ability to perform confined entry rescue. The entire Saddle Vent system can be completely set up in less than five minutes. Eight inch air duct is installed on the bottom of The Saddle Vent and run to the bottom of the manhole. This allows fresh air to be supplied to the workers and displace any harmful gases that may be deadly for the occupants. The use of the 90 degree elbow removes the severe kink in the air duct and allows for rotation of the intake duct to any desired position at the street level. The kit includes SVB-E8-2 blower and SV -CUP saddle vent ventilation kit.
Call For Availability
UOM : EA
$1,850.00
GASOLINE BLOWER 4HP - HONDA

GASOLINE BLOWER 4HP - HONDA

Items #: AIR SVB-G8-H

Propane Engine - Model SVB-G8P: Includes propane conversion kit, Briggs & Stratton engine and propane tank
Call For Availability
UOM : EA
$1,450.00
"INLET FILTER, STANDARD, 99% EFFICIENT"

"INLET FILTER, STANDARD, 99% EFFICIENT"

Items #: AIR SVB-IF9ST

This inlet filter is designed to fit Air Systems' "SVB" series of portable industrial blowers. The unit filters the ambient air where the blower is located so that workers in a confined space are not exposed to ambient dusts. This system will control dusts and particulates from entering a confined space where industrial coatings are being applied. The filter will also reduce the potential for dust ignition in confined space when used with an explosion-proof or intrinsically safe blower. Filters are available with 5 micron of 99.97% HEPA rating.
Call For Availability
UOM : EA
$120.00
"INLET FILTER HOLDER, 8  DIAMETER"

"INLET FILTER HOLDER, 8 DIAMETER"

Items #: AIR SVB-IFH9

The inlet filter is designed to fit Air Systems' SVB series of portable industrial blowers. The system filters the ambient air where the blower is located so that workers in a confined space are not exposed to ambient dusts. This system will control dusts and particulates from entering a confined space where industrial coatings are being applied. The filter will also reduce the potential for dust ignition in a confined space when used with an explosion-proof blower.
Call For Availability
UOM : EA
$300.00
10  TO 8  INTAKE ADAPTER - BLACK

10 TO 8 INTAKE ADAPTER - BLACK

Items #: AIR SVF-108ADP

Fits 8/10 AC/DC Air Systems
Call For Availability
UOM : EA
$60.00
"10  AXIAL FAN KIT,115VAC, 60HZ, 1/3HP"

"10 AXIAL FAN KIT,115VAC, 60HZ, 1/3HP"

Items #: AIR SVF-10ECUP

The 10" in-line axial fan has been designed to be used as a stand alone fan or it can be attached in series to run long lengths of ventilation duct. Intake and exhaust flanges allow for either 8" or 10" duct to be attached to either end or the blower to achieve positive or negative ventilation. The blower is made of light weight steel and is available in standard electric or explosion-proof electric.
Call For Availability
UOM : KT
$995.00
Electric 8in Ventilation Heater, 7kW

Electric 8in Ventilation Heater, 7kW

Items #: AIR SVF-7KW-8

Air Systems SVF-7KW-8 is a heavy-duty heater designed for confined space ventilation systems.
Call For Availability
UOM : EA
$3,695.00
AC Axial Fan, 1395 cfm Free Air, 1/3 HP

AC Axial Fan, 1395 cfm Free Air, 1/3 HP

Items #: AIR SVF-8AC
Brand: Air Systems International

AC Axial Fan, 1395 cfm Free Air, 1/3 HP Fan only
Call For Availability
UOM : EA
$450.00
"EXP-PROOF 10  ELECTRIC FAN KIT, 115/1VA

"EXP-PROOF 10 ELECTRIC FAN KIT, 115/1VA

Items #: AIR SVF10EXCUP

Air Systems Confined Space Fan Kit (Axial Expl Proof, 3.5A). Model: SVF10EXCUP. More details: Conf. Sp Fan Kit, Confined Space Fan Kit, Axial Explosion Proof, 1/3 HP, Duct Dia. 8 or 10 In., Material Steel, Maximum Flow in Free Air 1390 cfm, Voltage 115VAC, Amps 3.5, Color Red, Length 46 In., Width 25 In., Height 38 In., Standards UL/CSA Approved, Includes Conductive Duct 6 and 15 ft. Length, Conductive Saddle Vent(R), Conductive 90 Degrees Elbow, Universal Mount, and Polyethylene Carrier
Call For Availability
UOM : KT
$2,295.00
"8  PVC HOSE X 50

"8 PVC HOSE X 50' W/ATTACHED CUFF, BELT

Items #: AIR SVH-50

Heaters operate with blower only
Call For Availability
UOM : EA
$375.00
View Page:   « PREV 6 7 8 9 10 11 12 13 14 15 16 NEXT »