Search in Category

Eyewash and Shower Equipment

Eyewash and Shower Equipment

Eyewash and Shower Equipment 
Viewing Page 7 of 33 (385 results)
Back panel, high polish stainless steel

Back panel, high polish stainless steel

Items #: HAW BP6HPS

Model BP6HPS is a versatile and decorative back panel that increases location visibility of the fountain and also helps protect wall from inadvertent splash. It is a 15" x 9" (38 x 23) high-polished stainless steel panel.
Call For Availability
UOM : EA
$413.00
Chiller 8 gallons per hour

Chiller 8 gallons per hour

Items #: HAW HCR8

Cooling capacity of 8 gph (30.3 L) , 115V - 60Hz system with full load amps of 5, with a minimum 4" (10.2 cm) clearance for sides and back of unit. Haws electric water chiller is certified by WQA to NSF/ANSI Standard 61, Section 9, comply with ARI Standard 1010 and ANSI A117.1, and be listed by Underwriter Laboratories to U.S. and Canadian standards.
Call For Availability
UOM : EA
$900.00
Chiller 8 gal/hour 200-240 voltage range

Chiller 8 gal/hour 200-240 voltage range

Items #: HAW HCR8.50

Model HCR8.50 is a 220 Volt, 50 Hz remote chiller provides 8.0 gallons (30.3 L) per hour of cold water. This remote can provide chilled water to a water to a wide variety of fountains with modern styling. Chiller can be concealed under a counter, between or within walls (check local codes), or high on a wall or column. Ideally suited for factories, cafeterias, restaurants, schools, and offices. Other uses could be for precooling for beverage dispensers and fountains, machine coolant cooling, photo and X-ray processing, laboratory experimental work, or a capacity booster for ice cube makers. Model HCR8.50, 8-gph remote chiller, includes a heavy gauge galvanized steel cabinet.
Call For Availability
UOM : EA
$1,323.48
Freeze-resistant shower valve, 1-1/4in

Freeze-resistant shower valve, 1-1/4in

Items #: HAW MK81A

Model MK81A is a special freeze-protected valve that drains water from Model 8300FP combination shower/eyewash after closing to prevent freezing. 1-1/4" MIPS inlet. Standard sizes are 60" and 78" (152.4 and 198.1 cm) for bury depths of 24" and 42" (61 and 106.7 cm) respectively. Servicing Instructions: For replacement of damaged parts, order the VRKMK81A repair kit which includes packing, stuffing box, stuffing box nut, spring and plunger assembly with four O-rings.
Call For Availability
UOM : EA
$1,049.00
Freeze-resistant eye/face wash valve,

Freeze-resistant eye/face wash valve,

Items #: HAW MK8A

Model MK8A is a special freeze-protected valve that drains water from Model 8300FP combination shower/eyewash after closing to prevent freezing. 3/4" MIPS inlet. Standard sizes are 60" and 78" (152.4 and 198.1 cm) for bury depths of 24" and 42" (61 and 106.7 cm) respectively. Servicing Instructions: For replacement of damaged parts, order the VRKMK8A repair kit which includes packing, stuffing box, stuffing box nut, spring and plunger assembly with four O-rings.
Call For Availability
UOM : EA
$863.00
Stainless steel mounting plate

Stainless steel mounting plate

Items #: HAW MTG.3500

Stainless steel construction with 6" (15.2 cm) welded zinc anchors provides a solid support system for the pedestal fountain.
Call For Availability
UOM : EA
$366.00
6in  galvanized anchors for 3500 series

6in galvanized anchors for 3500 series

Items #: HAW MTG.3501

Galvanized 6" (15.2 cm) steel anchors along with 5/8" x 1-1/2" (1.6 x 3.8 cm) stainless steel bolts and washers provide a solid support system for the pedestal fountains.
Call For Availability
UOM : EA
$114.50
In-wall mounting frame, 1001MS,1001HPSMS

In-wall mounting frame, 1001MS,1001HPSMS

Items #: HAW MTGFR.DF1

Heavy gauge galvanized steel construction provides a solid support system for these single bubbler fountains that is not only sturdy but provides corrosion resistance as well.
Call For Availability
UOM : EA
$249.00
In-wall mounting frame, Hi-Lo

In-wall mounting frame, Hi-Lo

Items #: HAW MTGFR.LG

Heavy gauge galvanized steel construction provides a solid support system for the dual bubbler fountains that is not only sturdy but provides corrosion resistance as well. Wall opening size required is 31-1/8" wide, 37-5/8" high, and 12" deep (79.1 x 98.1 x 30.5 cm).
Call For Availability
UOM : EA
$300.00
Access plate, front, 3177

Access plate, front, 3177

Items #: HAW PA3177

Model PA3177, stainless steel access plate for main pedestal. Dimensions are 8-3/8" wide x 12-1/4" high.
Call For Availability
UOM : EA
$109.00
Bottom plate for 1001 and

Bottom plate for 1001 and

Items #: HAW PBM1000

Model PBM1000 is a replacement stainless steel bottom plate for Haws "Swirl" bowl brackets.
Call For Availability
UOM : EA
$130.50
Bottom plate for 1047 and

Bottom plate for 1047 and

Items #: HAW PBM1047

Model PBM1047 is a bottom access plate for a concrete arm fountain.
Call For Availability
UOM : EA
$175.00
View Page:   « PREV 2 3 4 5 6 7 8 9 10 11 12 NEXT »