Search in Category

Eyewash and Shower Equipment

Eyewash and Shower Equipment

Eyewash and Shower Equipment 
Viewing Page 9 of 38 (453 results)
HAW%206433

Strainer, lead-free celcon

Items #: HAW 6433

Model 6433 is a lead-free, celcon Y pattern water strainer with removable 100 mesh screen for easy cleaning. 3/8" NPT(F) inlet and outlet. 1-7/8" (4.8 cm) long with strainer arm extending to 2-15/16" (5.6 cm) overall width.
Usually Ships 2-5 Days
UOM : EA
$47.08
HAW%206438

Three hole brass strainer nipple,

Items #: HAW 6438

Model 6438 is a three-hole stainless steel strainer nipple used to connect the bubbler head to the valve.
Usually Ships 2-5 Days
UOM : EA
$26.77
HAW%206521FR

Wall mounted pneumatic freeze-resistant

Items #: HAW 6521FR

Installed in an area where the temperature remains at a minimum of 50° F (10° C), this unit will assist the fountain in remaining fully functional in freezing conditions
If a maintenance issue ever arises, rest assured that the valve system is easily accessed, making troubleshooting simpler
Flow is easlily adjustable with supplied regulator valve
Unit is applicable for single bubbler wall mounted freeze-resistant fountain designs
Usually Ships 2-5 Days
UOM : EA
$1,015.38
HAW%206603

Access panel, stainless steel

Items #: HAW 6603

Model 6603 is a 9" x 9" (22.9 x 22.9 cm) access panel designed to facilitate maintenance by allowing easier access to plumbing behind the wall. It is made of stainless steel with a satin finish and includes frame and screws.
Usually Ships 2-5 Days
UOM : EA
$193.85
HAW%206603HPS

Same as above in high polish finish

Items #: HAW 6603HPS

Model 6603HPS is a 9" x 9" (22.9 x 22.9 cm) access panel designed to facilitate maintenance by allowing easier access to plumbing behind the wall. It is made of high-polished stainless steel, and includes frame and screws.
Usually Ships 2-5 Days
UOM : EA
$318.46
HAW%206606HPS

Access panel, stainless steel w/high

Items #: HAW 6606HPS

Model 6606HPS is a 15" x 9" (38.1 x 22.9 cm) access panel designed to facilitate maintenance by allowing easier access to plumbing behind the wall. It is made of stainless steel with a high-polished finish. It is made to facilitate maintenance by allowing easier access to plumbing behind the wall.
Usually Ships 2-5 Days
UOM : EA
$406.15
HAW%206611

In-ground sand trap

Items #: HAW 6611

Model 6611 in ground sand trap, is designed to help prevent blockage of waste lines in pedestal drinking fountains. Installed adjacent to the fountain it collects sand and debris that can clog the drain line. Removable lid allows for easy maintenance.

Body and fittings are of hi-density black polyethylene. Cover is white polypropylene with eight vandal-resistant stainless steel screws, cadmium plated steel anchoring nuts, rubber gasket and three anti-skid strips. Plastic collector bucket. Cover is intended for foot traffic only. Key is furnished for vandal-resistant screws.
Usually Ships 2-5 Days
UOM : EA
$780.00
HAW%206620

Square step, 10in high for 3121 and

Items #: HAW 6620

Model 6620 is a square concrete step that matches the color and finish of Haws concrete drinking fountains to allow children access to the drinking water stream. It is a vibra-cast reinforced square concrete step 10" (25.4 cm) high for surface mounting. Standard color is Portland Gray cement with exposed aggregate finish. Anchor bolts supplied.
Usually Ships 2-5 Days
UOM : EA
$673.85
HAW%206635

Acrylic sand trap for 3500 series

Items #: HAW 6635

Model 6635 sand trap has a see through acrylic canister with lifting handle. Housed inside pedestal behind access door for easy dumping. Available on models 3500 and 3511. (This option cannot be used in conjunction with the 6250LF or 6275 bib faucets on Model 3511). The 6635 is not recommended for use on freeze resistant (FR) fountains unless it is removed during freezing conditions.
Usually Ships 2-5 Days
UOM : EA
$692.31
HAW%206800

Universal in-wall support carrier for

Items #: HAW 6800

Model 6800 universal support carrier is an excellent addition to any wall mounted fountain that may be subjected to excessive leverage. Suitable for installation in 2" x 4" (5.1 x 10.2 cm) stud wall. Must be used with models 6700, 6700.4, 6710, or 6715 mounting plates which are not included.
Usually Ships 2-5 Days
UOM : EA
$401.54
HAW%207360B-7460B

AXION MSR Wall mounted with bracket

Items #: HAW 7360B-7460B

Eyewash streams provide zero vertical velocity stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
Features a round 11" (27.9 cm) stainless steel receptor and aluminum wall bracket for long life
Includes a mesh in-line strainer to collect line debris, and ball valve with stainless steel ball and stem for durability
Supply: 1/2" IPS. Waste: 1- 1/4" IPS
Usually Ships 2-5 Days
UOM : EA
$369.23
HAW%207360BTWC

AXION MSR Wall mounted with bracket

Items #: HAW 7360BTWC

Low profile design accommodates wheelchair access
Eyewash streams provide zero vertical velocity stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
Reducing installation time, eye/face wash and valve assembly is pre-built and fully water/pressure tested. Unit also comes with trap and tailpiece to meet desired wall mounting requirements
Usually Ships 2-5 Days
UOM : EA
$701.54
View Page:   « PREV 4 5 6 7 8 9 10 11 12 13 14 NEXT »