Spill Control Supplies

Spill Control Supplies 
Viewing Page 11 of 58 (692 results)
MMM%20P-500

CHEMICAL SORBENT PARTICULATE

Items #: MMM P-500

This material may also be sprinkled over a spill or broadcast over a large area.
Usually Ships 2-5 Days
UOM : CS
$200.05
MMM%20P-DC22DD

Petrol Sorb Drum Cover, High Capacity

Items #: MMM P-DC22DD

For use in oil-only Sorbent applications Designed for use with 55 gallon drums Catches drips/spills that occur during dispensing Includes a skirt to catch drips that fall to the floor Size: 22-inches
Usually Ships 2-5 Days
UOM : CS (25 EA)
$142.82
MMM P-FL550DD/T-F2001 - Petrol Sorb Folded, High Capacity

Petrol Sorb Folded, High Capacity

Items #: MMM P-FL550DD/T-F2001

Four folded petroleum sorbents in one. It can be used as a boom, pillow, pad, or roll, which means fewer products need to be stocked to meet your sorbent needs.
Usually Ships 2-5 Days
UOM : CS (3 EA)
$128.21
MMM%20P-SKFL31

Petrol Sorb Spill kits, 31 Gallon

Items #: MMM P-SKFL31

Petrol Sorb Spill kits, 31 Gallon
Usually Ships 2-5 Days
UOM : KT
$204.69
MMM%20C-SKFL5

KIT SPILL CHEMICAL 5 GAL

Items #: MMM C-SKFL5

Folded sorbent roll can be used as a boom, pillow, pad, or roll for emergency response Compact for easy storage--ideal for rapid response Recommended for use with acids and bases as well as aqueous- or hydrocarbon-based fluids Comes encased in clear plastic shrink wrap to help resist damage from exposure Each case (3 kits) can sorb approximately 13.5 gallons
Usually Ships 2-5 Days
UOM : CS
$139.21
MBT%20SPL014

Spillver Bullet Spill Kit on a Roll

Items #: MBT SPL014

Spillver Bullet Spill Kit on a Roll Size: 5"x100', 1 per case, 15 cases per pallet
Usually Ships 2-5 Days
UOM : CS
$595.00
NPS%20411001

UNIVERSAL TRUK-KIT

Items #: NPS 411001

Ready-to-Use Grab & Go® is designed to fit behind the back seat of a truck. Kit is packaged in a heat-sealed polyethylene bag. ABSORBS UP TO 6 GALLONS/25 LITERS PER KIT
Usually Ships 2-5 Days
UOM : BG
$110.57
NPS%20430004

Liquid Base Neutralizer, Gallon

Items #: NPS 430004

Color Change process lets you know when Acids are safe to handle-Minimize the Risk! Many aggressive liquid spills involve hazardous acids that require a way to render them safe for final clean-up and disposal in accordance with local, state and federal regulations. KOLOR-SAFE® Neutralizers meet this requirement.
Usually Ships 2-5 Days
UOM : CS
$132.68
NPS%20430020

Liquid Base Neutralizer, 5 Gallon Carboy

Items #: NPS 430020

Color Change process lets you know when Acids are safe to handle-Minimize the Risk! Many aggressive liquid spills involve hazardous acids that require a way to render them safe for final clean-up and disposal in accordance with local, state and federal regulations. KOLOR-SAFE® Neutralizers meet this requirement.
Usually Ships 2-5 Days
UOM : CS
$173.99
NPS%20440130

Battery Acid Cleaner & Neutr 12/cs

Items #: NPS 440130

Formulated to clean and neutralize battery acid. Wipes remove corrosion from terminals, connectors and trays. If heavily corroded - after using wipes, a light scrubbing with a plastic bristle brush will remove corrosion with no messy foam. Contains acid neutralizing agents. KOLOR-SAFE® system lets you know when the acid is neutralized. This Product has a shelf-life and expiration date of 1 Year when stored in it’s original packaging
Usually Ships 2-5 Days
UOM : CS
$108.56
NPS%20520250

MERCURY CLEANUP KIT

Items #: NPS 520250
Brand: Safeware Authorized Supplier

Designed to handle all stages of cleaning up mercury spills. The MERCSORB® Spill Kit is designed for-one time use only. MERCSORB® Kits do not contain any chemicals designed to alter the the mercury’s toxicity or danger. Mercury Spill Control OSHA HOSPITAL RECOMMENDATIONS: “…Use mercury spill kits to help clean up small spills of 25ml or less. Kits should contain gloves, protective glasses, Hg absorb powder, mercury sponges, and a disposal bag.” HOW TO USE MERCURY SPILL KIT: 1) Evacuate employees from the spill area. 2) Personal protective equipment for exposure to mercury should be worn. 3) Ventilate the contaminated area. 4) Shake the vapor suppressor over the contaminated area being sure to cover any visible mercury. 5) Collect all vapor suppressor covered mercury using the wooden spatula and the mercury aspirator bottle. Wait 30 minutes before final clean-up. 6) Empty the aspirator bottle into the mercury waste bottle. 7) Activate the MERCSORB® Amalgamation Powder with two (2) ounces powder in a plastic mixing cup. Apply just enough water to form a paste (about 1 ounce). Mix the MERCSORB® Powder and water with a wooden spatula. 8) Apply a strip of MERCSORB paste across the edge of the mercury-contaminated area. Push the strip slowly across the contaminated surface with a wooden spatula. Apply the MERCSORB® paste in one direction only. Small droplets of mercury will be absorbed in the MERCSORB® paste. 9) Apply a second strip of the MERCSORB® paste to the area and push the strip across the area a second time. 1) Place the contaminated MERCSORB® paste into a sealed plastic container. 11) Wipe the contaminated area using a damp sponge. 12) Dispose of the used items and products in accordance with all local, state and federal regulations. 13) After all visible mercury has been properly collected from horizontal surface; sprinkle Mercury Indicator Powder over contaminated area. For vertical surfaces, mix one (1) part Mercury Indicator Powder with four (4) parts water to form a slurry. Paint the slurry on the contaminated vertical surface. 14) Mercury Indicator Powder should be left undisturbed on the contaminated surface for 24 hours. 15) A color change of pink to reddish-brown spots indicates contamination. Large black spots or areas indicate fresh or extensive mercury contamination. 16) Collect the Mercury Indicator Powder and place in a temporary disposal bag. 17) Clean up remaining mercury contaminated area with physical and chemical means as described in steps 7-11. 18) Repeat steps 12-16 until no indication of mercury is observed. 19) Once decontaminated, clean the area using a sponge and warm soapy water. All used products are contaminated and must be disposed of as toxic waste in accordance with local, state and federal regulations. Depending on the size and extent of the spill, additional equipment may be needed. Kit sorbency capacity is 25ml (337g) of Mercury. CAUTION: Only trained personnel should respond to mercury spills. MERCSORB® kits do not contain any chemicals designed to alter the mercury’s toxicity or danger. Mercury is absorbed directly through the skin and inhalation. Kit is designed for one-time use only. NOTE: Mercury has a density of 13.55 g/ml at 68° F(20° C). TO BE USED BY TRAINED PERSONNEL ONLY!
Usually Ships 2-5 Days
UOM : EA
$157.07
NPS%20888002

Gransorb Granular Sorbent, 30 lb Bag

Items #: NPS 888002

Spilfyter® Granular Sorbent is an all purpose oil and grease absorbent and works outstandingly with oils, solvents, grease compounds, chemicals and water based liquids. An outstanding all purpose absorbent spill cleanup and remediation product. Spilfyter® Granular has a 1:1 weight to weight absorbency ratio, i.e. 30lbs of oil will be absorbed by 30 lbs of Gran-sorb. It is clean safe, effective, highly absorbent and very environmentally responsible.
Usually Ships 2-5 Days
UOM : BG
$11.74
View Page:   « PREV 6 7 8 9 10 11 12 13 14 15 16 NEXT »