Spill Control Supplies

Spill Control Supplies 
Viewing Page 3 of 58 (692 results)
CEP%20EP50

Oil Only King Sorbent Pads, Med Weight

Items #: CEP EP50

Oil Only King Sorbent Pads, Med Weight 30"x34", 50 per case
Usually Ships 2-5 Days
UOM : CS
$111.24
CEP%20ESR144

Oil Only Sorbent Split Rolls, Med Weight

Items #: CEP ESR144

Oil Only Sorbent Split Rolls, Med Weight 15"x150ft, 2 per case
Usually Ships 2-5 Days
UOM : CS
$164.56
CEP%20GS10

General Purpose Sorbent Socks, 3"x10ft

Items #: CEP GS10

General Purpose Sorbent Socks, 3"x10ft 15 per case
Usually Ships 2-5 Days
UOM : CS (15 EA)
$105.48
CEP%20GS4

Universal Sorbent Sock, 3in X 4ft 40/cs

Items #: CEP GS4

Universal Sorbent Sock, 3in X 4ft 40/cs
Usually Ships 2-5 Days
UOM : CS (40 EA)
$93.28
CEP%20HAZSOC12

Haz Mat Sorbent Socks, 3"x 48", 12/case

Items #: CEP HAZSOC12

Haz Mat Sorbent Socks, 3"x 48", 12/case 20 gal absorbency
Usually Ships 2-5 Days
UOM : CS
$33.46
CEP%20UDTP25

Drum Top Sorbent Pads, 22" Diameter

Items #: CEP UDTP25

Drum Top Sorbent Pads, 22" Diameter 25 per case
Usually Ships 2-5 Days
UOM : CS
$91.02
JUS%2028635

EcoPolyBlend Spill Pallet 4drum Square

Items #: JUS 28635

EcoPolyBlend Spill Pallet 4drum Square
Usually Ships 2-5 Days
UOM : EA
$318.06
JV%20780281

GAPSEAL 1LB PRE-MIXED, HYDROCARBONS

Items #: JV 780281

Gapseal® Temporary Plugging Compound for plugging punctured drums or vessels. * Ideal for dealing with used oil in fleet maintenance locations. INSTRUCTIONS FOR USE: DIRECTIONS: 1. Wear personal protective equipment compatible with chemicals involved. 2. Remove GAPSEAL® from the container. 3. Form a ball with gloved hands. 4. Apply GAPSEAL® ball to leaking area. 5. Properly transfer and/or clean up the leaking liquid and place into safe containers. 6. Do not return used GAPSEAL® to its original container. 7. Tightly seal the original container when finished. 8. Dispose of all used articles according to local, state and federal regulations. NOTE: GAPSEAL® products, when used properly, will withstand five (5) p.s.i. of head pressure. GAPSEAL® Universal/Low Temperature Plugging Compound must be stored at temperatures below 1200 F (490 C) at all times and has no shelf life providing the container has never been opened. Once the container has been opened and the GAPSEAL® has been used, the product may dry out if the container has not been tightly sealed. WARNING: GAPSEAL@ Temporary Plugging Compounds are to be used as a temporary method of stopping leaks and spills and must be used in conjunction with secondary containment devices. It is strongly recommended that GAPSEAL@ not be used for more than 12 hours or be left unattended GAPSEAL@ for Hydrocarbon Spills is not recommended for use with strong oxidizers, bases or acids.
Usually Ships 2-5 Days
UOM : EA
$18.84
JV%20790204

SEAL GAP 1LB PRE-MIXED

Items #: JV 790204

Gapseal® Temporary Plugging Compound for plugging punctured drums or vessels. INSTRUCTIONS FOR USE: DIRECTIONS: 1. Wear personal protective equipment compatible with chemicals involved. 2. Remove GAPSEAL® from the container. 3. Form a ball with gloved hands. 4. Apply GAPSEAL® ball to leaking area. 5. Properly transfer and/or clean up the leaking liquid and place into safe containers. 6. Do not return used GAPSEAL® to its original container. 7. Tightly seal the original container when finished. 8. Dispose of all used articles according to local, state and federal regulations. NOTE: GAPSEAL® products, when used properly, will withstand five (5) p.s.i. of head pressure. GAPSEAL® Universal/Low Temperature Plugging Compound must be stored at temperatures below 1200 F (490 C) at all times and has no shelf life providing the container has never been opened. Once the container has been opened and the GAPSEAL® has been used, the product may dry out if the container has not been tightly sealed.
Usually Ships 2-5 Days
UOM : CS
$201.02
MMM%20P-212

Chem Sorb Mini-Boom

Items #: MMM P-212

Chemical sorbent mini-booms are typically used to encircle spills and to contain leaks. A 3 inches diameter scrim on the outside of a the boom identifies the application. The 3M™ Chemical Sorbent Mini-Boom P-212 is 12 feet in length.
Usually Ships 2-5 Days
UOM : CS (4 EA)
$243.81
MMM%20P-300

CHEMICAL SORBENT PILLOW

Items #: MMM P-300

Pillows are designed with a scrim that encases particulate sorbent material. Pillows are used in areas where more capacity is desired than can easily be achieved using a sorbent pad. For use on most aggressive (hazardous) and non-aggressive liquids. Pillows are designed with a scrim that encases particulate Sorbent material. Pillows are small and light weight. Pillows are tear-resistant and feature a high capacity for holding liquid. Ideal for placing at the source of a leak.
Usually Ships 2-5 Days
UOM : CS
$202.45
MMM%20T-156

Petrol Sorb Pads 100 Pads/Bale

Items #: MMM T-156

This highly sorbent petroleum pad features a low-profile design, for easy placement in tight areas. Conveniently sized pads allow the user to quickly spread sorbent over and in the path of a spill. For use in oil-only Sorbent applications. Pads are conveniently sized and can be quickly spread on and in the path of a thin spill. May be used on a work surface in anticipation of a spill. Ideal for use under docks, in shallow water, rocky shorelines, marshes, and beaches.
Usually Ships 2-5 Days
UOM : BL
$172.58
View Page:   « PREV 1 2 3 4 5 6 7 8 9 10 11 NEXT »