3580 Remote Flashing Beacon Controller for Dual Relay Outputs 12 - 18 VDC

The flashing beacon controller - 3580 Remote series is designed to control and manage a visual or auditory public warning system. Flashing beacons, barrier gates, message signs, or sirens are turned on by the flashing beacon controller when an emergency event triggers the system. The flashing beacon controller triggers the warning system by either monitoring sensors attached directly to the controller or a radio transmission from a separate monitoring system. The flashing beacon controller allows you to assign up to three inputs to each of four output channels to control the public warning system. The data transceiver is a VHF radio which provides the flashing beacon controller with outstanding resistance to signal interference caused by rain giving you more reliable performance during inclement weather events. The solar panel voltage regulator is a maximum power point tracking charger that allows the flashing beacon controller to activate a load such as flashing beacons. The flashing beacon controller is configured to measure and report beacon current, for confirmation that the public warning system beacons are flashing.

• 5 ft battery cable, 2 ft radio cable, 8 in antenna cable

• High_Sierra_Electronics_3580-30_Specification_Sheet.pdf https://www.safewareinc.com//ASSETS/DOCUMENTS/ITEMS/EN/High_Sierra_Electronics_3580-30_Specification_Sheet.pdf
• Specification Sheet https://www.safewareinc.com//ASSETS/DOCUMENTS/ITEMS/EN/High_Sierra_Electronics_3580-30_Specification_Sheet.pdf