Controller 12 - 15 VDC 5 W
| Amperage Rating | : | <160 mA Standby, 750 mA Warning Lights |
| Connection Type | : | N-Type (F) Antenna (VHF), SMA (F) Antenna (GPS) |
| Data Format | : | ALERT2 |
| Dimensions | : | 12 x 14 x 5-1/2 in |
| For Use With | : | Dual Relay Outputs |
| Frequency Range | : | VHF 135 - 174 MHz, UHF 406 - 470 MHz (Upto 8 Independent TX/RX Pre-Programmed Frequencies, Switch Selectable) |
| Includes | : | Model 3512-02 HydroMet Data Logger, ALERT2 Transceiver, Ritron Radio (148 - 174 MHz) Radio, Lightning Protection (VHF and GPS), and Battery Cable 5 ft, and Model 5315-01 Solar Charger and Load Control |
| Mounting | : | L-Panel |
| Power Rating | : | 5 W (Switch Selectable), PTT Test Switch Provided |
| Product Family | : | Alert 2 Hydromet |
| Product Type | : | Controller |
| Speaker | : | Monitors Rx Channel |
| Voltage Rating | : | 12 - 15 VDC |
The ALERT2 Hydromet Controller model 3582-30 is a two-way ALERT2 Controller assembly for high water and other inclement weather detection systems. This 4-channel ALERT2 Controller system can be used in either a master-and-remotes configuration for high water, fog, high wind and snow/ice detection systems for roadway and public access areas as well as for dam and hydro-related pump stations. It can also be applied as a remotely controlled station to activate remote solar powered cameras, pumps or public warning devices such as beacons, message signs, gates and sirens controlled directly by remote commands initiated by OneRain's contrail base station and contrail server software.
- ALERT2 two-way command and control capability
- Configurable as either a master, gauging station or remote warning site
- Received Signal Strength Indicator (RSSI) test-point
- Audio output for SINAD - 1/8 in phone jack
- Transmit - HSE 3512 API commands over Ethernet
- Squelch - open - 112 dBm, close - 114 dBm
High_Sierra_Electronics_3582-30_Specification_Sheet.pdf