Railcar Emergency Response Kit (ERK)
The Indian Springs ERK is designed to fit a wide range of railcar housings and arrangements. Kit will work on standard chlorine housings, sulfur dioxide, ammonia, etc.
NOTE: KIT BOX INCLUDED (NOT SHOWN IN PHOTO)
ERK Features:
- » PATENTED CLAMPING JAW – GRIPPER TECHNOLOGY: Allows the unit to be attached securely anywhere along the housing (housings to 38¿ OD).
- » One piece adjustable, aluminum yoke assembly
- » Yoke assembly opens to a span of 38”
- » Yoke assembly does not require port hole openings for attachment
- » Yoke assembly can be placed anywhere along housing ring
- » No “bridge” yoke needed to contain sampling valve and thermowell
- » Three aluminum, Teflon-lined capping hoods and outlet valves, 2 Steel Hoods
- » Custom molded Viton and EPDM Gaskets
- » All components fit into one polyethylene tool box
- » Yoke assembly works with existing tank car kits in field
- » The ERK is a logical addition to our Chlorine Emergency kits A, B, and C. This kit has a lighter and more universal design with clamping jaws that afford for attachment anywhere on the housing ring. The teflon-lined aluminum hoods enable responders to easily bring the ERK to the top of railcars containing hazardous materials and safely do their work.
Includes:
- » 1pc. Yoke Assembly, Adjusting, with Clamping Jaws (38” Max Housing OD) – part#18C
- » 1pc. Hood Assembly (Steel) with (20V) Vent Valve: 3” ID x 13“ Inside Height – part#20A
- » 2pc. Gasket Molded EPDM – part#20BMV
- » 2pc. Gasket Molded Viton, – part#20BEP
- » 1pc. Hood Assembly (Steel) with (30V) Vent Valve: 5-1/2” ID x 12“ Inside Height, – part#30A
- » 2pc. Gasket Molded EPDM7, – part#30BEP
- » 2pc. Gasket Molded Viton, – part#30BMV
- » 1pc. Hood Assembly (Alum – Teflon lined) with (46V) Vent Valve: 6-3/4” sq(Inside) x 5-1/2IH + 6-1/2“ ID x 12”IH, – part#46A
- » 2pc. Gasket Molded EPDM, – part# 46BEP
- » 2pc. Gasket Molded Viton, – part# 46BMV
- » 1pc. Hood Assembly (Alum – Teflon lined) with (54V) Vent Valve: 7-1/2“IL x 6-7/8”IW x 9-1/2“IH, – part#54A
- » 2pc. Gasket Molded EPDM, – part#54BEP
- » 2pc. Gasket Molded Viton, – part#54BMV
- » 1pc. Hood Assembly (Alum – Teflon lined) with (64V) Vent Valve: 7-7/8”” sq(Inside) x 10-1/4“IH,- part#64A
- » 2pc. Gasket Molded EPDM, – part#64BEP
- » 2pc. Gasket Molded Viton, – part#64BMV
- » 1pc. Rope and Carabiners (2), – part# X-1
- » 1pc. Socket Wrench Set, – part# X-2
- » 1pc. Wire Brush, – part# X-3
- » 1pc. Wrench, 15” Adjustable, – part# X-4
- » 1pc. Hammer, Machinist 1-1/2 lbs, – part# X-5
- » 1pc. Paint Scraper, 1-1/4” Blade, – part# X-6
- » 1pc. Kit Box Seals, – part# X-7
- » 1pc. Bolt Cutter, 18“, – part# X-8
- » 1pc. Wire Cutter, – part# X-9
- » 2pc. Gasket Sack, – part# X-10
- » 1pc. Tool Bucket and Carabiner, – part# X-11
- » Kit-Box: 17”H x 19”W x 44”L, – part# 151-X
- » 1 pc. Wrench, valve wrench – part#200-X
- » 2pc. Instruction Booklet, – part# IX