Bone Safety Signs SZ-412
  1. pin-int

Steel Springless Sign Stand for 48 in and 36 in Roll-Up Signs 6.5 x 6.5 x 24 in

  • Brand Name: Bone Safety Signs
  • PN: BNE SZ-412
  • MPN: SZ-412
  • Min. Order Qty: 1
  • Availability: loading
Height      :      24 in
Length      :      6-1/2 in
Material      :      Steel
Product Type      :      Sign Stand
Width      :      6-1/2 in

It shall be manufactured from steel component parts which have been powder-coated and clear zinc-plated to minimize corrosion and have a minimum wall thickness of 0.059 in. The sign stall shall be designed using basic nut and bolt construction, so that all component parts may be readily replaced if worn or damaged. The sign stand shall allow wind spillage on the sign face from any direction and be capable of withstanding wind gusts up to 60 mph. without requiring additional ballast or tie downs. The sign stand shall return to the upright position when tipped sideways at 65 degree. The sign stand shall not require additional hardware to attach the roll-up sign to the stand. An auto-latch bracket assembly securely fastened by means of snap quick release, shall provide a positive guide and down stop position as well as a secure single-point attachment between the two piece polycarbonate corner pocket and the stand. The sign stand auto-latch bracket shall have a quick release lever to release the roll-up sign from the stand's single-point attachment by means of a single upward lifting motion of the auto-latch bracket release lever, in concert with a lifting and sliding motion of the roll-up sign. The lifting motion of the roll-up sign slides the sign's single attachment point polycarbonate pocket assembly out of the stand's auto-latch bracket assembly. The mast of the sign stand shall incorporate a nickel-plated quick release snap button to attach the auto-latch bracket, as well as optional accessories to the sign stand. The legs of the sign stand shall be independently adjustable as well as multi-positional to accommodate uneven terrain or placement on curbs. All four legs shall have a telescopic inner leg for maximum footprint in heavy winds.

  • Compact for ease in storage/less than 1 cu-ft when stored
  • Lightweight design
  • Springless design
  • Over-sized pull pins and kick release for quick release of legs
  • 3 separate height adjustments for uneven terrain
  • Bright orange legs for extra-visibility on curbs and sidewalks
  • Powder-coated and zinc-plated for maximum corrosion resistance